This is a very nice custom glass railing done with 1/2 inch thick tempered glass brush stainless steel spigots and a low profile stainless steel top rail. This is a great option to take advantage of your view with minimal obstructions. As well as it gives you the ability to hose off your deck and let water run off because …
This is an interior glass railing on the stairway and the small loft/landing area. This project was done with CR Laurence brushed stainless steel spigots and a one and a half inch diameter round stainless steel top rail also by CR Laurence. It’s a great way to make a small space look more open as well as give it a …
Here is a custom interior glass stairway railing and interior glass loft railing. This is all done with 1/2 inch thick tempered glass panels set in a black CR Lawrence spigot with a low profile black top rail. The combination of the glass stair railing and the floating wood stairs really compliments each other very well and gives the room …
Here is a very nice interior glass office wall. The customer requested us to separate a section of his office so that they could have meetings with customers that give more privacy. This glass is all 1/2” clear tempered andwe used a satin anodized U channel on the top and bottom to install it. For the door we used a …
We installed a 1/2” tempered glass railing set in CR Lawrence brushed stainless steel spigots. Glass spigots are a great option because the glass can be easily removed and reinstalled as needed. Also I would leave space under the glass for water to get out or to blow leaves off your deck. It also gives you a great unobstructed view …
This is a beautiful modern 1/2” tempered glass stair railing we installed on an interior stairway. The glass was installed into custom black spigots. Glass spigots are a great option for glass railings because unlike base shoe the glass can be easily removed and replaced if it were to become chipped or scratched. It also has a very nice modern …
This job called for a frameless glass shower enclosure done in 3/8” clear tempered glass with square chrome hardware from CR Lawrence. This shower is also steam shower that has a movable vent above the door. This project was located in the Hillcrest neighborhood of San Diego, California. Please get in touch for your frameless shower enclosures or any glass …
Rancho Santa Fe large frameless glass shower enclosure. This shower enclosure was done using 1/2” clear tempered glass with CR Laurence satin brass hardware. All hardware done with a square style hinges and handles. The shower door was done with a top and bottom pivot hinge. It’s a great final touch on this beautiful bathroom. This project was located in …
Here we have a tasteful Glass Railing set on CR Lawrence brushed stainless steel standoffs. The glass is 9/16 tempered laminated. The customer wanted a glass railing but have it the least visible as possible. With the standoff system you don’t see anything when you’re on the deck looking out due to all the mounting supports installed around the outside …
Custom 3/8 inch frameless glass shower enclosure with multiple notches around the wall. The glass is all three eights inch clear tempered and the hardware is matte black made by CR Lawrence. This project was located at a home in La Jolla, California.
Here is a custom frameless glass shower enclosure with three eights inch tempered glass panels and a door on each side of the shower. Customer chose to go with CR Lawrence matte black hardware to match the other finishes in the bathroom. This project was located in the Carlsbad area of San Diego
This is a beautiful custom staircase glass railing that was installed inside of a house in Delmar San Diego. This was a challenging project because we only had so much room between the elevator and where the glass was going. The customer went with brushed stainless steel standoffs and half inch tempered glass panels. Standoffs give a very high end …
Here is a custom half inch tempered glass railing set an a CR Lawrence aluminum bass shoe channel was marine grade powder coated with a matte black finish. The combination of the glass and wood together give a very nice modern look. This project was located in Pacific Beach area of San Diego
This is a beautiful glass railing / wind wall we did in the East County area of San Diego. This is an aluminum base shoe product made by CR Lawrence. We recessed the shoe into the Stonewall so that it has the effect and looks like it was just Glass coming out of the wall. The customer also had us …
This was a really cool project located in the Rancho Santa Fe area of San Diego. The customer has a courtyard off of their master bedroom and turned part of it into a custom glass outdoor shower. In creating this massive outdoor shower space,. We used 1/2” thick tempered glass doors coming from the interior hallway leading into the shower …
This was a custom project at a local San Diego MMA gym and fitness center. The customer wanted to get the most out of their space so we used frosted glass to split up the shower stalls and create a divider while still maintaining privacy. The glass is all half-inch thick tempered. In the hardware is done in a brushed …
Custom 3/8” frameless glass shower enclosure with CR Laurence matte black hardware. This shower has square style handles and hinges to match the customers existing shower hardware. The contrast of the matte black and white marble look great together. This project was done in the Pacific Beach area of San Diego.
This project was done on a beautiful beachfront home in La Jolla. We used all 9/16″ laminated tempered safety glass. The rooftop and lower deck glass was set in CRL aluminum base shoe channel and wrapped with a bronze cladding. The stairway is the focal point and really catches the eye. This was also 9/16″ laminated tempered glass, it was …